SP-2

Sputtering System - 6 target

Nanofabrication Facility

MAKE

AJA International

MODEL

ATC

LOCATION

Cleanroom G07 LISE

Equipment Description and Usage:
The SP-2 has a turbo-pumped main chamber that reaches a vacuum in the low 10-8 Torr range and a turbo-pumped load lock chamber for fast pump-down times. Six shuttered magnetron guns containing two inch diameter targets. Three DC guns for deposition of conductive materials and three RF guns for deposition of non-conductive materials. Argon flow and chamber pressure control for optimizing deposition conditions. N2 and O2 Mass Flow Controlled gas lines for reactive sputtering. Heated substrate holder that maintains temperature control up to 800oC before, during and/or after deposition. Substrate holder can be rotated and accommodates substrates up to 4″ in diameter. Substrate bias for plasma assisted substrate pre-cleaning or plasma assisted deposition.

Applications: Sputter deposition of metal, semiconductor, and/or dielectric thin films onto pieces of substrates or whole substrates up to 4″ diameter. Depositions can be single thin films or multilayered with up to six different films. Shuttered magnetron guns maintain sharp interfaces between thin films.

Targets Available for Use:
Ag, Al, Au, Cr, Cu, Ge, Mo, Nb, Ni, NiFe, Pd, Pt, Si, Ti, W, Al2O3, ITO,
Si3N4, SiO2, TiO2, TiN, ZnO, CaF2, MgF2

Contact staff for training information.

Ed Macomber

617-384-5227

eddiemac@cns.fas.harvard.edu

primary contact

David LaFleur

617-384-5024

dlafleur@cns.fas.harvard.edu

Logins

doubleArrow-right